- 6V/5A-25V/1A and -25V/1A outputs
- Low noise and excellent regulation
- GPIB and RS-232 standard
With the 0.01% load and line regulation, the E363xA Series can maintain a steady output when power line and load changes occur. The power supplies specify both normal mode voltage/current noise and common mode current noise. The low normal mode noise specifi cation assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection.
If you have an IEEE-488 card or RS-232 in a PC, these power supplies will work for you. Every model comes equipped with both GPIB and RS-232 as standard. All programming is done in easy-to-use. SCPI (Standard Commands for Programmable Instruments). The users guide describes the process for the first-time programmers.
A knob and self-guiding keypads allow you to set the output at your desired resolution quickly and easily. You can store and recall for up to three complete setups using the internal non-volatile memory. The output on/off button sets the output to zero.
E3631A triple-output power supply:
This famous 80-watt triple output supply offers three independent outputs: 0 to 6 V/5A, 0 to +25V/1A and 0 to 25V/1A. The 6 V output is electrically isolated from the +/-25 V supply to minimize any interference between circuits under test. The +/-25V outputs can be set to track each other.
E3632A/33A/34A singleoutput dual range power supplies:
These single output power supplies give you the fl exibility to select from a dual output range. The output load is protected against overvoltage and overcurrent, which are easily monitored and adjusted from the front panel and remote interface. Remote sensing is available to eliminate the errors caused by voltage drops on the load leads. The E3633A/34A offer front and rear output terminals for easy wiring.