- Frequency Range 9KHz - 26.5GHz
- 1KHz RBW (10Hz optional)
- -155dBm Displayed Average Noise Level (10Hz RBW, optional preamp)
- +-1 dB amplitude accuracy
- 99dB third order dynamic range
- Field rugged and portable
The 1 ms RF sweep time and up to 40 measurements per second gives you virtual real-time measurement response. This means you spend less time testing or tuning circuits. High-speed remote measurements and data transfer of up to 40 measurements per second reduce critical test time in automatic test environments. Optional 50ns zero-span sweep time illuminates fast changing signals in the time domain.
A continuously phase-locked synthesizer operating over the entire sweep provides improved frequency accuracy, stability and repeatability. The outstanding amplitude accuracy of +/- 1dB up to 3 GHz and +/- 2.5dB up to 26.5 GHz adds measurement confidence, improved yield and reduced test margins. The amplitude correction factor capability lets users remove frequency-related effects. Automatic background alignment provides continuous calibration between sweeps, which means the full accuracy is maintained without operator intervention.
With the optional digital resolution bandwidth (RBW) filters (10Hz to 30 Hz), you obtain finer resolving power to separate and measure closely spaced signals. A narrow shape factor (5:1) aids measurement of small signals close to the carrier. These digital RBW filters sweep up to 220 times faster than their analog equivalents, while improving sensitivity.
99 dB maximum 3rd order dynamic range (+12dBm TOI) and the 5 dB step attenuator let you see low-level distortion. Spur searching is enhanced with the -152 dBm sensitivity, optional built-in preamp and the fast measurement speed. Up to 120dB of calibrated display range allows simultaneous display of large and small signals.
Take the analyzers lab grade performance into the field protected by rubber encased frames, rain-resistant front panel and shielded vents. A snap on battery provides up to 1.9 hours of cordless operation and 12V dc capability allows operation with automotive electrical systems. Five-minute warm-up offers full measurement accuracy without waiting. And, automatic back ground alignment maintains the full measurement accuracy over time and varying temperatures.
The ESA-E series can be configured specifically for your application as well as protect your investment into the future. The six-slot option card cage allows you to choose only the performance you need now and upgrade in the future. This scalable performance in combination with Keysight measurement personalities, downloaded into the internal memory, can transform the analyzer into an application focused solution, for example, CDMAOne or GSM measurements. A growing number of plug-in option boards provide even more measurement capability. Most option boards are easily installed into the built-in card cage and are retrofittable.