Keysight (Agilent) E7403A 6.7GHz EMC Spectrum Analyser

BUY NOW PRICE: 
£POA
CONTACT US FOR THE BEST UK PRICE

RENTAL PRICE: 
£POA
RATE VARIES WITH CONFIG & RENTAL PERIOD.
CONTACT US FOR THE BEST RENTAL RATE

REQUEST A QUICK QUOTE
OR
Call us - we're here to help 01183 800 800
  • Frequency range 9KHz to 6.7GHz
  • Pre-compliance EMI testing
  • Preprogrammed, automated measurements
  • Full spectrum analyzer functionality
Whether your industry is information technology, automotive, communications, or medical electronics, you need to evaluate the EMI performance of your products during the development phase. With Keysights E7400A Series EMC analyzers, you can evaluate performance quickly and easily.

When combined with a broadband antenna, the E7400A Series analyzer provides the capabilities to check for radiated emissions coming from your DUT. This is best done in an area that is free from reflective objects such as an open area or EMI chamber.

Test for noise or interference placed on power or data lines by coupling the E7400A series instrument to the power or data line through a line impedance stabilization network (LISN) device or absorbing clamp.

If you have an emissions problem, you can use the E7400A with an 11940A or 11941A close field probe to isolate and diagnose the source of the problem.

The E7400A Series EMC analyzers have the following functionality and features to speed you through measurements:

– Detectors to perform peak, quasi-peak, and average measurements.

– Complete measurement setups including span and EMI bandwidths.

– Display two limit lines and margins.

– Corrections for antennas, cables, and amplifiers.

– Measure peak, quasi-peak, and average amplitudes of 2000 signals and store the results into the internal list.

– Use the Zone feature to zoom in on a signal while viewing the broad spectrum.

– Built-in 3.5 inch disk drive.

– Large, crisp color display.

– Built-in preamplifier with 20 dB nominal gain.

– Sort, remeasure, mark, and delete signals in the internal list.

– Standard GPIB and parallel ports.

– Battery pack available.

– Edit or customize and store limit lines and correction factors.

– Optional built-in tracking generator to 3 GHz

Keysight (Agilent) E7403A 6.7GHz EMC Spectrum Analyser Options

E7403A - 060LOW EMISSIONS SHIELDING
E7403A - 1AXREPLACE GPIB WITH SERIAL PORT
E7403A - 1D5HIGH-STABILITY FREQUENCY REFERENCE
E7403A - 1D6TIME-GATED SPECTRUM ANALYSIS
E7403A - 1DNSTANDARD ANALYZER WITH TRACKING GENERATOR
E7403A - A4JADDS IF AND SWEEP PORTS
E7403A - AYXFAST TIME DOMAIN SWEEP

Last Updated: 10-Oct-2017