Schloder SESD216 ESD Simulator (10kV Contact / 16.5kV Air)
Free UK Mainland Delivery (Sales)
Manuals and accessories supplied
Comprehensive Warranty on ALL Products
UK Certified Quality Assurance
Schloder SESD216 ESD Simulator (10kV Contact / 16.5kV Air) Description:
- 16,5 kV AIR / 10 kV CON discharge
- IEC 61000-4-2 (150 pF / 330 Ohm)
- Predefined tests – Standard and others
- Battery or mains operation
The test generator SESD 216 simulates electrostatic discharge as defined in the standard IEC / EN 61000-4-2. Depending on the Equipment Under Test (EUT) and the test set-up for laboratory tests, the IEC standard shows two test methods:
1. Air discharge.
With this method the test generator SESD 216 must be moved to the EUT. The discharge of the high voltage is in the air. The test voltage can be varied from 200V to 16.5000V. The very short rise time of each single pulse generates a wide RF spectrum and interference.
2. Contact discharge.
The discharge electrode with a sharp point is connected to the EUT. The discharge switch is a vacuum relay. This test method reduces the interference of parameters like approach speed, amplitude, humidity and temperature.
The contact discharge is the favourite test method since it is most reproducible. Air discharges are used when contact discharges are not possible - e.g. at plastic housings.
We offer the refurbished used Schloder SESD216 ESD Simulator (10kV Contact / 16.5kV Air) for sale and rental.
The Schloder SESD216 is fully tested and refurbished in our in-house ISO9001 calibration laboratory. We supply manuals, accessories, full warranty and a free-of-charge Certificate of Conformity. We can also provide the Schloder SESD216 with a fresh calibration for a small additional charge.
If you have under-utilised test equipment talk to us about trading-in or part-exchanging it towards the Schloder SESD216 or other refurbished test equipment.